Arid Bilge Systems Series 2
Arid Bilge System Series 2
Arid Bilge Systems Series 2 - Image 3
Arid Bilge Systems Series 2 - Image 4
Arid Bilge Mini Standard Pickup

Arid Bilge Systems Series 2

Choose 2 or 3 Intakes

$1,995.00 – $2,967.00

Arid Bilge is a central vacuum system that automatically and effortlessly maintains bilge compartments throughout the vessel 100% dusty dry. 

SKU: N/ACategories: Tags: ,

Series 2 units are available with two or three intake ports and standard solenoid intake valves or the premium, lower-maintenance pinch valves, and a power supply that accepts either 12 or 24 volt DC power.

Arid Bilge is automatic, reliable, flexible, and best of all, it really works.

  • Eliminate the #1 source of onboard odors
  • Lower onboard humidity and prevent condensation damage
  • Find small leaks that now leave trails through a dry bilge
  • Stop mold and mildew before it starts to grow
  • Protect other systems such as generators, gyro stabilizers, & bow thrusters
  • Enhance the vessel’s resale value

Available with 2 or 3 independently controlled intake ports (zones).

You will notice the Arid Bilge difference within 24 hours of installation.

Weight N/A
Dimensions N/A
Height

11.75 inches / 30 centimeters
Box width

5.75 inches / 14.5 centimeters
Depth

7 inches / 17.5 centimeters
Box dry weight

8 pounds / 3.75 kilograms
Intake tubing

5/32” Polyethylene tubing, 100 feet provided
Unit Maximum Expected Flow Rate

3.5 US gallons / 14 liters per hour
Power draw

0.07 amp (70 milliamps) average standby draw, 0.7 amp average run draw @ 12 volt DC w/ 1 active zone
Certifications

This unit meets USCG 33CFR 183.410 ignition protection
Discharge port

Single point discharge port – 1/2" barbed fitting.
Control

PLC Direct Logic 05 Koyo D0-05 processor, software proprietary.
Compressor / vacuum pump

Schwarzer Precision
Main unit material

Air injected white PVC plastic
Limited warranty

One year parts and labor.
Available Upgrades

Standard Solenoid Valves, Pinch Valves
Bilge pickup options

Mini Standard (most popular) for flat bottoms, offset for a light V bottom, wand for a sharper V bottom. One pickup of your choice is included for each zone plus one spare.
Zones Type

Zones 2 or 3 independently controlled intakes
Power

Accepts 12 volt DC or 24 volt DC input power.

Pickups

There are 3 pickup styles available for the Series 2.
All pickup styles have filter pads underneath which prevent debris from transiting into the intake tubing.
The pickups are not prone to clogging. Please see our blog article on pickups for additional detail.

Pickup Type Description Dimensions Picture
Mini Standard Pickup Use this on a flat-bottomed compartment.
Typically placed near the aft bilge pump.
This is our most popular pickup style with a variety of applications.		 2″x3″
Offset Pickup Use this in a V-shaped compartment (up to a 45° angle).
Typically placed in the bow of the vessel or aft under the engines where the bottom of the bilge is angled.		 2.75″x4.25″
Small Pickup Wand Use this flexible tube in tight areas.
Typically used in A.C. drip pans, near limber holes, under a bilge pump leveling platform, or in other narrow deep pockets that collect fluid.
Popular in older boats, wooden boats, or custom boats.		 0.5″x4.75″ (bottom pad)